Serial Signal Distributor
Hardware Level RS232C Signal Distribution
The AT-NDB310 can perform 4 line RS232 distribution output of RS232C communication signals. Also, to provide for the connection of a convertor to the distributed signals, DC+5V output is possible.
Examples of Use
- Distribution of GNSS correction data to multiple GNSSs.
- Process a single signal with multiple computers.
- Convert a RS422 signal to RS232 and distribute it.
By changing settings with an internal switch, it is possible to select the distribution configuration. Also, DC5V power can be output from the distribution output connector.
|Uses an RS232 receiver and an RS232 transceiver
4 distribution routes (can be changed)
Dsub9M (male connector)
|DC 9V to DC3 2V
Normally 500mW (when using DC 5V maximum 10W)
|165(H) × 112(W) × 55(D) mm
* Specifications and appearance are subject to change without notice.