Home
JAPANESE

Home | About Akasaka Tec | Solution | Products | Support | Inquiries | Sitemap

Products
Hardware
Accesories
AT-TXM/RXM
MSP-100/200
AT-NDB
AT-Heavy

Home
Limited power and low power consumption radio communication modem

Click here to download catalog
Since the modem has limited power, you don't need to obtain a license to use the modem. The modem enables you to have long-distance radio data communication by a high efficiency amplifier installed in the modem. You can use the modem as a repeater with a transmitter and a receiver.

The modem is used to transmit and to receive Standard compensation signal (RTK data, DGPS data, etc.) in GPS surveying and is used for radio transmission of RS232C data between computers.
AT-TXM01R
Limited area low power consumption modem transmitter

The transmitter is designed to work in DC10V_DC32V, which is considered to be relatively wide. The transmitter is protected by a special water-proof resin case which is designed to easily transmit electrical waves.
* The distance for transmission differs depending
on the environment
* If there is a structure in the direction of the radio
waves, thestructure may interfere with the transmission.
Options
- Special signal cable
5m/10m/20m/30m/50m
- Adaptor cable
Leica SR530 direct connection cable
Trimble 4000, 7400 direct connection cable
Personal computer direct connection cable
- Survey pole adaptor
5/8 inch nut pole
AT-RXM01R
Limited area low power consumption modem receiver

A Radio reception preamplifier is installed in the receiver and the distance of radio reception is greatly improved. The receiver can be connected to a GPS made by various makers with a special cable. If you use the GPS which has a power supply, you can use the GPS with only one cable which provides the receiver with data and power. The data can be distributed to two RS232 output and one RS422 output by an installed distributor circuit.
* The distance for reception differs depending on the
environment .
* If there is a structure in the direction of the radio
waves, the structure may interfere with the transmission.
Options
- High gain reception tuning antenna
M400-2SP-429MHz for 1m antenna
GP-6-429MHz for 3m antenna
GP-9M-429MHz for 5m antenna
- Super low loss coaxial cable
available for 2m/4m/5m/10m
- GPS receiver direct connection cable
Leica SR530 direct connection cable
Trimble 4000, 7400 direct connection cable
- Data cable for repeater
50m special signal cable
AT-RXM500
Limited area low power radio modem Receiver (for SR530)

The installed radio reception preamplifier drastically improves the reception distance. Since B.P.F (Band Path Filter) is installed, only limited area low power radio band, 429MHz goes through; more stability is established. Leica's GPS SR530 is an all-in-one type GPS, you are free from the connection of troublesome cables.
* The distance for reception differs depending on the
environment.
* If there is a structure in the direction of the radio
waves, the structure may interfere with the transmission.


* Installation image
Options
- High gain reception tuning antenna
M400-2SP-429MHz for 1m
GP-6-429MHz for 3m
- Super low loss coaxial cable
2m/3m
SPEC AT-TXM01R AT-RXM01R AT-RXM500
- Type RCR-STD-16A
- Electric wave type
- Frequency
- Modulation
F1D
429.25MHz_429.75MHz(12.5MHz Step)
Direct two values FSK
- Number of channels
- Channel change
40CH
Direct switch
- Communication I/F RS232/RS422 RS232
- Radio preamplifier --- Gain 20dB
S/N 1.4dB
ANT impedance: 50_
ANT port: M-J type
- Size
- Weight
465mm _ 126mm _ 60mm
1980g
242mm _ 152mm _ 41mm
980g
192mm _ 80mm _ 68mm
450g

Related website

SR530 - Leica Geosystems
Please visit our"Inquiry Page"for your opinions and inquiries, or E-mail us.
info@akasakatec.com




PAGE TOP