CS Mate PRO GNSS Antenna & Receiver All-in-One

Product Summary

Suitable Industries：Construction Industry／Manufacturing Industry／Infrastructure Management

i-Con

CS Mate Pro is an all in one solution for high precision RTK positioning operations with multi GNSS compatibility. Boasting a strong multipathing resistant antenna and a compact lightweight casing to provide a dependable and reliable all in one RTK Positioning Solution.

Features

CS Mare Pro Main Features

Multi Frequency, Multi GNSS Compatible
Hot Swappable Batteries
Ample Communication Modules
Small and Lightweight Design

　　　
CSMatePRO本体
　　　
Multi Frequency and Multi GNSS Compatibility
Compatible with all GNSS Satellites to greatly reduce startup time for a stress-free high accuracy high precision positioning.
　
Ample Communication Modules
Compatible with Virtual Reference Station via 3G/4G/LTE Cellular Module. Access and configure easily through a web browser via Wi-Fi connection. Utilise Cell, Wi-Fi, Bluetooth or direct connection for RTK-GNSS Correction Data.
　　
Operation Modes
With multiple communication and open GNSS interface, it is possible to run CS Mate-Pro in both Base Station mode where it sends RTK Correction Data to rover station or as a rover station that receives GNSS Correction Data from a Base Station or through cellular based GNSS Correction Service..
　　
　　　　
ホットスワップ

Hot Swappable Battery
CS Mate Pro has 2 hot-swappable batteries installed to insure reliability and ease of replacement for continuous operation.
　　
Light and Compact Design
Encased in magnesium alloy housing that is electromagnetically shielded, the CS Mate Pro is designed for the harsh environment of the worksite as well as being lightweight and rugged in a small compact case.
　　
IP67 Rated
CS Mate Pro is built to completely keep small particles such as sand and dirt out and to withstand being briefly submerged in water.

Specification

GNSS Receiver

Receiver Type	Multi-Frequency, Multi-GNSS Receiver
Signal Compatibility	GPS L1CA/L1P/L1C/L2P/L2C/L5 GLONASS G1/G2/G3 , P1/P2 BeiDou B1i/B2i/B3i/B1C/B2A/B2B/B2ACEBOC GALILEO E1BC/E5a/E5b/E6BC/ALTBOC QZSS L1CA/L2C/L5/L1C/LEX IRNSS L5 Atlas
Channel	800+
RTK Format	RTCM2.1,RTCM2.3,RTCM3.0,RTCM3.1, RTCM3.2 including MSM
Recording Range	1, 2, 3, 4, 10Hz (Optional 20, 50Hz)

　　
　　
Precision

Positioning	RMS（67%）	２DRMS（95%）
Singular Position *1	1.2m	2.5m
SBAS *1	0.3m	0.6m
Atlas (H10) *1.3	0.04m	0.08m
RTK *1.2	8mm + 1ppm	15mm + 2ppm
Tilt Correction (<30°)	2cm (w/1.8m pole)
Startup	<10 Seconds

*1 Depends on the multipath environment, number of observation satellites, satellite configuration, and electrical interference layer conditions
*2 Depends on baseline length
*3 Requires subscription purchase from Hemisphere GNSS
　　
　　
L-Band Receiver

Receiver Type	Single Channel
Channel	1525 ～ 1560 MHz
Sensitivity	-130 dBm
Channel Width	5 kHz
Satellite Selection	Manual Select/ Automatic Select
Re-Connection Time	15 Seconds

　　
　　　
Communication

Bluetooth	Bluetooth 2.1+EDR/4.0 LE
Wi-Fi	802.11 b/g
Network	LTE FDD : B1/B3/B8/B18/B19/B26 LTE TDD : B41 WCDMA : B1/B6/B8/B19
WebUI	Software updates, receiver status display and settings, and data downloads from smartphones, tablets, and other Wi-Fi devices are possible.

　　
　　　
Ports

LEMO 5-pin	External Changing Port
LEMO 7-pin	Serial Port, USB
Card Slot	Micro SIM, Micro SD

　　
　　
Data & Storage

Storage Type	Internal 8GB Memory, SD Card (32GB Max)

　　
　　
Build Specification

Weight	1.19 kg (1 Battery), 1.30 (2 Battery)
Dimensions	156 x 156 x 76 mm

　　
　　
　　
Environmental

Operational Temperature	-30℃ ～ 65℃
Storage Temperature	-40℃ ～ 80℃
Protection rating	IP67. Protected against temporary submersion up to 1m deep
Impact Resistance	MIL-STD-810G, method 516.6 2m Drop from Pole to Concrete 1m Drop Free Fall to Wooden Floor
Humidity Tolerance	100%
Shock Resistance	MIL-STD-810G,method 514.6E-1
Flame Resistance	UL recognized , 94HB Flame Class Rating (3) 1.49mm
Chemical Resistance	Industry-Strength Alcohol,Detergent,UV Light,Steam